Pei, Yanzhong and Shi, Ziaoya and LaLonde, Aarond and Wang, Heng and Chen, Lidong and Snyder, G. Jeffrey (2011) Convergence of electronic bands for high performance bulk thermoelectrics. Nature, 473 (7345). pp. 66-69. ISSN 0028-0836 http://resolver.caltech.edu/CaltechAUTHORS:20110519-114428074
Full text not available from this repository.
Use this Persistent URL to link to this item: http://resolver.caltech.edu/CaltechAUTHORS:20110519-114428074
Thermoelectric generators, which directly convert heat into electricity, have long been relegated to use in space-based or other niche applications, but are now being actively considered for a variety of practical waste heat recovery systems—such as the conversion of car exhaust heat into electricity. Although these devices can be very reliable and compact, the thermoelectric materials themselves are relatively inefficient: to facilitate widespread application, it will be desirable to identify or develop materials that have an intensive thermoelectric materials figure of merit, zT, above 1.5 (ref. 1). Many different concepts have been used in the search for new materials with high thermoelectric efficiency, such as the use of nanostructuring to reduce phonon thermal conductivity, which has led to the investigation of a variety of complex material systems. In this vein, it is well known, that a high valley degeneracy (typically ≤6 for known thermoelectrics) in the electronic bands is conducive to high zT, and this in turn has stimulated attempts to engineer such degeneracy by adopting low-dimensional nanostructures. Here we demonstrate that it is possible to direct the convergence of many valleys in a bulk material by tuning the doping and composition. By this route, we achieve a convergence of at least 12 valleys in doped PbTe_(1) − _(x)Se_(x) alloys, leading to an extraordinary zT value of 1.8 at about 850 kelvin. Band engineering to converge the valence (or conduction) bands to achieve high valley degeneracy should be a general strategy in the search for and improvement of bulk thermoelectric materials, because it simultaneously leads to a high Seebeck coefficient and high electrical conductivity.
|Additional Information:||© 2011 Macmillan Publishers Limited. Received: 13 December 2010; Accepted: 14 March 2011; Published online: 04 May 2011. This work was supported by NASA-JPL and the DARPA Nano Materials programme; the work at SIC-CAS was supported by CAS. We thank J.-P. Fleurial, S. Bux, D. Zoltan and F. Harris for measurements of transport properties at NASA’s Jet Propulsion Laboratory and at ZT Plus Inc. Author Contributions: Y.P. synthesized the samples, measured the high temperature properties and developed the three-band model; X.S. and L.C. measured the low temperature Hall coefficient and confirmed the high temperature transport properties on some of the samples. A.L. performed the hot pressing; Y.P., X.S., A.L., H.W., L.C. and G.J.S. analysed the experimental data; and Y.P. and G.J.S. wrote and edited the manuscript.|
|Subject Keywords:||Materials science; Applied physics and engineering; Physics|
|Usage Policy:||No commercial reproduction, distribution, display or performance rights in this work are provided.|
|Deposited By:||Jason Perez|
|Deposited On:||19 May 2011 20:02|
|Last Modified:||19 May 2011 20:02|
Repository Staff Only: item control page