Demetriou, Marios D. and Johnson, Wiliam L. (2004) Modeling the transient flow of undercooled glass-forming liquids. Journal of Applied Physics, 95 (5). pp. 2857-2865. ISSN 0021-8979 http://resolver.caltech.edu/CaltechAUTHORS:DEMjap04
See Usage Policy.
Use this Persistent URL to link to this item: http://resolver.caltech.edu/CaltechAUTHORS:DEMjap04
n a recent experimental study on flow behavior of Vitreloy-1 (Zr41.25Ti13.75Cu12.5Ni10Be22.5), three distinct modes of flow are suggested: Newtonian, non-Newtonian, and localized flow. In a subsequent study, the experimental flow data is utilized in a self-consistent manner to develop a rate equation to govern local free volume production. In the present study the production-rate equation is transformed into a transport equation that can be coupled with momentum and energy transport via viscosity to formulate a model capable to govern the flow of undercooled glass forming liquids. The model is implemented to study the flow behavior of undercooled Vitreloy-1 melt. For a temperature of 700 K and shear loading of 1.0 MPa, the model predicts that the flow profile gradually stabilizes to its Newtonian limit while the liquid is maintained in structural and thermal equilibrium. For the conditions of 675 K and 100 MPa, the model predicts that the flow profile departs from its Newtonian limit and gradually stabilizes to a non-Newtonian limit. The non-Newtonian profile is evaluated independently by considering structurally quasistatic conditions, which yield the shear-rate dependency of flow. For the conditions of 650 K and 2.0 GPa, the model predicts that the flow continuously localizes and ultimately accelerates unconstrained, while the system is driven out of structural and thermal equilibration towards an unstable state associated with free volume generation, viscosity degradation, and temperature rise. The computed temperature and shear rate evolutions for the three distinct flow modes are superimposed on a temperature-shear rate diagram and appear to computationally reproduce the experimental flow map. The system's structural state that appears to dictate flow behavior is quantified by a dimensionless number, which results from a time scale analysis of the free volume production equation.
|Additional Information:||©2004 American Institute of Physics. (Received 23 June 2003; accepted 8 December 2003) The authors would like to acknowledge the support of the DARPA Defense Sciences Office and the Army Research Office under Grant No. DAAD19-01-1-0525. Valuable discussions with Dr. Sven Bossuyt, Dr. Rainer Birringer, and Theofilos Strinopoulos are also gratefully acknowledged.|
|Subject Keywords:||zirconium alloys; titanium alloys; copper alloys; nickel alloys; beryllium alloys; vitrification; non-Newtonian flow; non-Newtonian fluids; shear flow; viscosity; flow simulation; liquid alloys|
|Usage Policy:||No commercial reproduction, distribution, display or performance rights in this work are provided.|
|Deposited By:||Archive Administrator|
|Deposited On:||05 Jun 2006|
|Last Modified:||26 Dec 2012 08:54|
Repository Staff Only: item control page