Marble, Frank E. and Ritter, William K. and Miller, Mahlon A. (1946) Effect of the NACA Injection Impeller on the Mixture Distribution of a Double-Row Radial Aircraft Engine. National Advisory Committee for Aeronautics , Washington, D. C.. http://resolver.caltech.edu/CaltechAUTHORS:MARnacatn1069
See Usage Policy.
Use this Persistent URL to link to this item: http://resolver.caltech.edu/CaltechAUTHORS:MARnacatn1069
The NACA injection impeller was developed to improve the mixture distribution of aircraft engines by discharging the fuel from a centrifugal supercharger impeller, thus promoting a thorough mixing of fuel and charge air. Tests with a double-row radial aircraft engine indicated that for the normal range of engine power the NACA injection impeller provided marked improvement in mixture distribution over the standard spray-bar injection system used in the same engine. The mixture distribution at cruising conditions was excellent; at 1200, 15OO, and 1700 brake horsepower, the differences between the fuel-air ratios of the richest and the leanest cylinders were reduced to approximately one-third their former values. The maximum cylinder temperatures were reduced about 30 [degrees] F and the temperature distribution was improved by approximately the degree expected from the improvement in mixture distribution. Because the mixture distribution of the engine tested improves slightly at engine powers exceeding 1500 brake horsepower and because the effectiveness of the particular impeller diminished slightly at high rates of fuel flow, the improvement in mixture distribution at rated power and rich mixtures was less than that for other conditions. The difference between the fuel-air ratios of the richest and the leanest cylinders of the engine using the standard spray bar was so great that the fuel-air ratios of several cylinders were well below the chemically correct mixture, whereas other cylinders were operating at rich mixtures. Consequently, enrichment to improve engine cooling actually increascd some of the critical temperatures. The uniform mixture distribution providod by the injection impeller restored the normal response of cylinder temperatures to mixture enrichnent.
|Item Type:||Report or Paper (Technical Report)|
|Usage Policy:||No commercial reproduction, distribution, display or performance rights in this work are provided.|
|Deposited By:||Archive Administrator|
|Deposited On:||20 Jun 2005|
|Last Modified:||26 Dec 2012 08:40|
Repository Staff Only: item control page