Weikle, Robert M, II and Kim, Moonil and Hacker, Jonathan B. and De Lisio, Michael P. and Rutledge, David B. (1992) Planar MESFET grid oscillators using gate feedback. IEEE Transactions on Microwave Theory and Techniques, 40 (11). pp. 1997-2003. ISSN 0018-9480. http://resolver.caltech.edu/CaltechAUTHORS:WEIieeetmtt92
See Usage Policy.
Use this Persistent URL to link to this item: http://resolver.caltech.edu/CaltechAUTHORS:WEIieeetmtt92
A method for quasi-optically combining the output power of MESFETs in which drain and source leads couple directly to the radiated field is introduced. The design consists of a planar grid of devices placed in a Fabry-Perot cavity. Capacitive feedback is provided to the gate, allowing oscillation at much higher frequencies than previous grids. The oscillation frequency is dependent on the device characteristics, the resonator cavity, and the symmetries of the grid. A transmission-line model for the grid is discussed and used to design two oscillator arrays. A 16-element grid has produced 335 mW of power at 11.6 GHz with a DC-to-RF conversion efficiency of 20%. This design was scaled to produce a 36-element grid oscillator with output power of 235 mW at 17 GHz. These results represent a significant improvement in the performance of planar grid oscillators. The planar configuration of the grid is very convenient for monolithic integration and is easily scalable to millimeter-wave frequencies.
|Additional Information:||© Copyright 1992 IEEE. Reprinted with permission. Manuscript received August 29, 1991; revised February 20, 1992. This work was supported by the Amy Research Ofice and the Northrop Corporation. J.B. Hacker holds an NSERC fellowship from Canada and M.P. De Lisio holds an NSF fellowship.|
|Usage Policy:||No commercial reproduction, distribution, display or performance rights in this work are provided.|
|Deposited By:||Archive Administrator|
|Deposited On:||29 Nov 2006|
|Last Modified:||26 Dec 2012 09:18|
Repository Staff Only: item control page