CaltechAUTHORS
  A Caltech Library Service

Minimum-dissipation models for large-eddy simulation

Rozema, Wybe and Bae, Hyun J. and Moin, Parviz and Verstappen, Roel (2015) Minimum-dissipation models for large-eddy simulation. Physics of Fluids, 27 (8). Art. No. 085107. ISSN 1070-6631. doi:10.1063/1.4928700. https://resolver.caltech.edu/CaltechAUTHORS:20210315-152246966

[img] PDF - Published Version
See Usage Policy.

851Kb

Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20210315-152246966

Abstract

Minimum-dissipation eddy-viscosity models are a class of sub-filter models for large-eddy simulation that give the minimum eddy dissipation required to dissipate the energy of sub-filter scales. A previously derived minimum-dissipation model is the QR model. This model is based on the invariants of the resolved rate-of-strain tensor and has many desirable properties. It appropriately switches off for laminar and transitional flows, has low computational complexity, and is consistent with the exact sub-filter tensor on isotropic grids. However, the QR model proposed in the literature gives insufficient eddy dissipation. It is demonstrated that this can be corrected by increasing the model constant. The corrected QR model gives good results in simulations of decaying grid turbulence on an isotropic grid. On anisotropic grids the QR model is not consistent with the exact sub-filter tensor and requires an approximation of the filter width. It is demonstrated that the results of the QR model on anisotropic grids are primarily determined by the used filter width approximation, and that no approximation gives satisfactory results in simulations of both a temporal mixing layer and turbulent channel flow. A new minimum-dissipation model for anisotropic grids is proposed. This anisotropic minimum-dissipation (AMD) model generalizes the desirable practical and theoretical properties of the QR model to anisotropic grids and does not require an approximation of the filter width. The AMD model is successfully applied in simulations of decaying grid turbulence on an isotropic grid and in simulations of a temporal mixing layer and turbulent channel flow on anisotropic grids.


Item Type:Article
Related URLs:
URLURL TypeDescription
https://doi.org/10.1063/1.4928700DOIArticle
ORCID:
AuthorORCID
Bae, Hyun J.0000-0001-6789-6209
Moin, Parviz0000-0002-0491-7065
Verstappen, Roel0000-0001-8565-6188
Additional Information:© 2015 AIP Publishing LLC. Received 30 April 2015; accepted 5 August 2015; published online 19 August 2015. A part of this research was conducted at the Stanford CTR summer program 2014. W.R. and R.V. are grateful for the opportunity to participate in this program, the received financial support, and the interactions with the CTR staff and the participants of the summer program. W.R. receives financial support from the Ubbo Emmius Fund of the University of Groningen and kindly acknowledges support from the National Aerospace Laboratory NLR. W.R. and R.V. acknowledge sponsoring by the Netherlands Organization for Scientific Research (NWO) for the use of supercomputing facilities. H.J.B. receives financial support from the Stanford Graduate Fellowship.
Group:GALCIT
Funders:
Funding AgencyGrant Number
Stanford UniversityUNSPECIFIED
University of GroningenUNSPECIFIED
National Aerospace LaboratoryUNSPECIFIED
Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO)UNSPECIFIED
Issue or Number:8
DOI:10.1063/1.4928700
Record Number:CaltechAUTHORS:20210315-152246966
Persistent URL:https://resolver.caltech.edu/CaltechAUTHORS:20210315-152246966
Official Citation:Minimum-dissipation models for large-eddy simulation. Phys. Fluids 27, 085107 (2015); https://doi.org/10.1063/1.4928700
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:108441
Collection:CaltechAUTHORS
Deposited By: Tony Diaz
Deposited On:19 Mar 2021 21:13
Last Modified:19 Mar 2021 21:20

Repository Staff Only: item control page