A Caltech Library Service

Experimental Procedure for the Determination of Cavity Parameters

Yariv, Amnon and Clapp, Fred D. (1959) Experimental Procedure for the Determination of Cavity Parameters. Review of Scientific Instruments, 30 (8). pp. 684-687. ISSN 0034-6748. doi:10.1063/1.1716723.

PDF - Published Version
See Usage Policy.


Use this Persistent URL to link to this item:


A new experimental procedure for the determination of cavity parameters is described. The procedure follows the basic steps described by Slater. In this method one measures the frequencies at which the voltage standing wave ratio at the input to the cavity reaches a predetermined value. The knowledge of these frequencies coupled with a determination of the state of coupling to the cavity yields the necessary information. An exposition of some pertinent theoretical points is followed by a detailed description of the experimental procedure.

Item Type:Article
Related URLs:
URLURL TypeDescription
Additional Information:© 1959 The American Institute of Physics. Received December 22, 1958; revised May 28, 1959. This research was supported by the U.S. Air Force through the Air Force Office of Scientific Research in the Air Research and Development Command, under Contract No. AF 49(638)-102. The authors take pleasure in thanking Professor A.F. Kip and Professor J.R. Whinnery for helpful discussions on this subject.
Funding AgencyGrant Number
Air Force Office of Scientific ResearchAF 49(638)-102
Issue or Number:8
Record Number:CaltechAUTHORS:YARrsi59
Persistent URL:
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:12728
Deposited By: Archive Administrator
Deposited On:21 Dec 2008 05:46
Last Modified:08 Nov 2021 22:32

Repository Staff Only: item control page