A Caltech Library Service

Analysis of supershear transition regimes in rupture experiments : the effect of nucleation conditions and friction parameters

Lu, Xiao and Lapusta, Nadia and Rosakis, Ares J. (2009) Analysis of supershear transition regimes in rupture experiments : the effect of nucleation conditions and friction parameters. Geophysical Journal International, 177 (2). pp. 717-732. ISSN 0956-540X.

PDF - Published Version
See Usage Policy.


Use this Persistent URL to link to this item:


We consider the effect of the rupture initiation procedure on supershear transition of Mode II ruptures on interfaces governed by linear slip-weakening friction. Our study is motivated by recent experiments, which demonstrated the transition of spontaneous ruptures from sub-Rayleigh to supershear speeds in the laboratory. In these works the experiments were analysed using the Burridge–Andrews model of supershear transition, in which a supershear daughter crack is nucleated in front of the main mother rupture. It was concluded that the critical slip of the linear slip-weakening formulation needs to be pressure-dependent for a good match with experiments. However, the dynamic rupture initiation mechanism in the experiments was conceptually different from the quasi-static one adopted in the numerical work used for comparison. Here, our goal is to determine the effect of the nucleation by numerically modelling the experiments using a rupture initiation procedure that captures the dynamic nature of the wire explosion mechanism used in the experiments. We find parameter regimes that match the experimentally observed transition distances for the entire range of experimental conditions. Our simulations show that the dynamic rupture initiation procedure significantly affects the resulting transition distances, shortening them by about 30–50 per cent compared to those predicted through the quasi-static rupture initiation process. Moreover, for some cases, the dynamic initiation procedure changes the very mode of transition, causing a direct supershear transition at the tip of the main rupture instead of the mother–daughter mechanism. We find reasonable parameter regimes which match experimentally determined transition distances with both direct supershear transition at the rupture tip and the Burridge–Andrews (mother–daughter) mechanism, using both pressure-independent and pressure-dependent critical slip. The results show that there are trade-offs between the parameters of the rupture initiation procedure and the properties of interface friction. This underscores the importance of quantifying experimental parameters for proper interpretation of the experiments and highlights the importance of the rupture initiation procedure, in simulations of both experiments and real-life earthquake events.

Item Type:Article
Related URLs:
URLURL TypeDescription
Lapusta, Nadia0000-0001-6558-0323
Rosakis, Ares J.0000-0003-0559-0794
Additional Information:© 2009 John Wiley & Sons, Inc. Accepted 2009 January 5. Received 2009 January 3; in original form 2008 April 12. NL gratefully acknowledges the support of NSF (Grant EAR 0548277) for this study.AJR gratefully acknowledges the support of NSF (Grant EAR 0207873), the US Department of Energy (Grant DE-FG52-06NA 26209) and MURI (Grant N000140610730, Dr Y.D.S. Rajapakse, Program Manager). The numerical simulations for this research were performed on Caltech Division of Geological and Planetary Sciences Dell cluster. We thank Kaiwen Xia for helpful discussions.
Funding AgencyGrant Number
Department of Energy (DOE)DE-FG52-06NA 26209
Office of Naval Research (ONR)N000140610730
Subject Keywords:Earthquake dynamics; Rheology and friction of fault zones; Dynamics and mechanics of faulting; Fractures and faults; Mechanics; theory; and modelling
Issue or Number:2
Record Number:CaltechAUTHORS:20090706-134648271
Persistent URL:
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:14498
Deposited By: Tony Diaz
Deposited On:07 Jul 2009 23:14
Last Modified:09 Mar 2020 13:19

Repository Staff Only: item control page