A Caltech Library Service

The effect of asymmetric damage on dynamic shear rupture propagation II: With mismatch in bulk elasticity

Bhat, H. S. and Biegel, R. L. and Rosakis, A. J. and Sammis, C. G. (2010) The effect of asymmetric damage on dynamic shear rupture propagation II: With mismatch in bulk elasticity. Tectonophysics, 493 (3-4). pp. 263-271. ISSN 0040-1951.

[img] PDF - Published Version
Restricted to Repository administrators only
See Usage Policy.


Use this Persistent URL to link to this item:


We investigate asymmetric rupture propagation on an interface that combines a bulk elastic mismatch with a contrast in off-fault damage. Mode II ruptures propagating on the interface between thermally shocked (damaged) Homalite and polycarbonate plates were studied using high-speed photographs of the photoelastic fringes. The anelastic asymmetry introduced by damage is defined by ‘T’ and ‘C’ directions depending on whether the tensile or compressive lobe of the rupture tip stress concentration lies on the damaged side of the fault. The elastic asymmetry is commonly defined by ‘+’ and ‘−’ directions where ‘+’ is the direction of displacement of the more compliant material. Since damaged Homalite is stiffer than polycarbonate, the propagation directions in our experiments were ‘T+’ and ‘C−’. Theoretical and numerical studies predict that a shear rupture on an elastic bimaterial interfaces propagates in the ‘+’ direction at the generalized Rayleigh wave speed or in some numerical cases at the P-wave speed of the stiffer material, P_(fast). We present the first experimental evidence for propagation at P_(fast) in the ‘+’ direction for the bimaterial system undamaged Homalite in contact with polycarbonate. In the ‘−’ direction, both theory and experiments find ruptures in elastic bimaterials propagate either at sub-shear speed or at the P-wave speed of the softer material, P_(slow), depending on the loading conditions. We observe that the off-fault damage effect dominates the elastic bimaterial effect in dynamic rupture propagation. In the ‘C−’ direction the rupture propagates at sub-shear to supershear speeds, as in undamaged bimaterial systems, reaching a maximum speed of P_(slow). In the ‘T+’ direction however the rupture propagates at sub-shear speeds or comes to a complete stop due to increased damaged activation (slip and opening along micro-cracks) which results in a reduction in stored elastic potential energy and energy dissipation. Biegel et al. (2010-this issue) found similar results for propagation on the interface between Homalite and damaged Homalite where rupture speeds were slowed or even stopped in the ‘T−’ direction but were almost unaffected in the ‘C+’ direction.

Item Type:Article
Related URLs:
Rosakis, A. J.0000-0003-0559-0794
Additional Information:© 2010 Elsevier B.V. Received 1 October 2009; revised 27 February 2010; accepted 24 March 2010. Available online 29 March 2010.
Subject Keywords:Dynamic shear rupture; Bimaterial ruptures; Damage mechanics; Supershear
Issue or Number:3-4
Record Number:CaltechAUTHORS:20101220-093824979
Persistent URL:
Official Citation:Bhat, H. S., R. L. Biegel, et al. (2010). "The effect of asymmetric damage on dynamic shear rupture propagation II: With mismatch in bulk elasticity." Tectonophysics 493(3-4): 263-271.
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:21426
Deposited By: Tony Diaz
Deposited On:20 Dec 2010 19:14
Last Modified:09 Mar 2020 13:19

Repository Staff Only: item control page