CaltechAUTHORS
  A Caltech Library Service

A CMOS Broadband Power Amplifier With a Transformer-Based High-Order Output Matching Network

Wang, Hua and Sideris, Constantine and Hajimiri, Ali (2010) A CMOS Broadband Power Amplifier With a Transformer-Based High-Order Output Matching Network. IEEE Journal of Solid-State Circuits, 45 (12). pp. 2709-2722. ISSN 0018-9200. https://resolver.caltech.edu/CaltechAUTHORS:20110112-123555604

[img]
Preview
PDF - Published Version
See Usage Policy.

4075Kb

Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20110112-123555604

Abstract

A transformer-based high-order output matching network is proposed for broadband power amplifier design, which provides optimum load impedance for maximum output power within a wide operating frequency range. A design methodology to convert a canonical bandpass network to the proposed matching configuration is also presented in detail. As a design example, a push-pull deep class-AB PA is implemented with a third-order output network in a standard 90 nm CMOS process. The leakage inductances of the on-chip 2:1 transformer are absorbed into the output matching to realize the third-order network with only two inductor footprints for area conservation. The amplifier achieves a 3 dB bandwidth from 5.2 to 13 GHz with +25.2 dBm peak P_sat and 21.6% peak PAE. The EVM for QPSK and 16-QAM signals both with 5 Msample/s are below 3.6% and 5.9% at the output 1 dB compression point. This verifies the PA’s capability of amplifying a narrowband modulated signal whose center-tone can be programmed across a large frequency range. The measured BER for transmitting a truly broadband PRBS signal up to 7.5 Gb/s is less than 10^(-13) , demonstrating the PA’s support for an instantaneous wide operation bandwidth.


Item Type:Article
Related URLs:
URLURL TypeDescription
http://dx.doi.org/10.1109/JSSC.2010.2077171DOIUNSPECIFIED
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5625137PublisherUNSPECIFIED
Additional Information:© 2010 IEEE. Manuscript received April 27, 2010; revised August 11, 2010; accepted August 12, 2010. Date of current version December 03, 2010. This paper was approved by Guest Editor Kari Halonen. The authors would like to thank Prof. A. Emami and Dr. S. Weinreb at Caltech for their technical advice. The authors also acknowledge Mr. Ta-Shun Chu at USC, Prof. Y. J. Wang at NCTU, Mr. S. Kousai at Toshiba, the members of Caltech CHIC group for their numerous suggestions, and Toshiba Corporation for chip fabrication.
Subject Keywords:Broadband; CMOS, high-order output matching; impedance transformation; instantaneous bandwidth; optimum load impedance; power amplifier; transformer
Other Numbering System:
Other Numbering System NameOther Numbering System ID
INSPEC Accession Number11684797
Issue or Number:12
Record Number:CaltechAUTHORS:20110112-123555604
Persistent URL:https://resolver.caltech.edu/CaltechAUTHORS:20110112-123555604
Official Citation:Wang, H.; Sideris, C.; Hajimiri, A.; , "A CMOS Broadband Power Amplifier With a Transformer-Based High-Order Output Matching Network," Solid-State Circuits, IEEE Journal of , vol.45, no.12, pp.2709-2722, Dec. 2010 doi: 10.1109/JSSC.2010.2077171 URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5625137&isnumber=5625049
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:21733
Collection:CaltechAUTHORS
Deposited By: Jason Perez
Deposited On:14 Jan 2011 18:04
Last Modified:03 Oct 2019 02:28

Repository Staff Only: item control page