CaltechAUTHORS
  A Caltech Library Service

A 12.5+12.5 Gb/s Full-Duplex Plastic Waveguide Interconnect

Fukuda, Satoshi and Hino, Yasufumi and Ohashi, Sho and Takeda, Takahiro and Yamagishi, Hiroyuki and Shinke, Satoru and Komori, Kenji and Uno, Masahiro and Akiyama, Yoshiyuki and Kawasaki, Kenichi and Hajimiri, Ali (2011) A 12.5+12.5 Gb/s Full-Duplex Plastic Waveguide Interconnect. IEEE Journal of Solid-State Circuits, 46 (12). pp. 3113-3125. ISSN 0018-9200. https://resolver.caltech.edu/CaltechAUTHORS:20120104-113526830

Full text is not posted in this repository. Consult Related URLs below.

Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20120104-113526830

Abstract

A new interconnect solution with plastic waveguide is demonstrated. The system consists of a pair of transceivers and a plastic waveguide. Millimeter wave signal is transmitted in a low-cost long piece of solid plastic dielectric acting as a waveguide. The plastic waveguide medium offers a large bandwidth for data communication using mm-wave carrier frequencies. Plastic waveguide interconnects do not require costly electrical-to-optical and optical-to-electrical conversion devices or precise alignment and offer longer transmission distances than wireless solutions due to better field confinement and lower path loss. Multiple plastic waveguides can be used in parallel and the modulated data at different frequencies can be multiplexed to increase the data rate. The demonstrated transceiver chips operate at carrier frequencies of 57 GHz and 80 GHz, and are fabricated in 40 nm low-power logic CMOS. The total area and power consumption of two transceivers are 0.41 mm^2 and 140 mW, respectively. The fabricated demonstrator with Yagi-couplers achieves full-duplex transmission of 12.5 Gb/s ASK modulated signal in each direction over the 120 mm polystyrene waveguide with no equalization. The observed bit error rates for both channels are less than 10^(-12) for a PRBS length of 2^(7)-1 at the total data rate of 25 Gb/s. This paper shows the feasibility of the plastic waveguide interconnect as a promising alternative to electrical, optical, and wireless interconnects.


Item Type:Article
Related URLs:
URLURL TypeDescription
http://dx.doi.org/10.1109/JSSC.2011.2168870DOIUNSPECIFIED
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6062391&tag=1PublisherUNSPECIFIED
Additional Information:© 2011 IEEE. Manuscript received April 12, 2011; revised July 01, 2011; accepted August 18, 2011. Date of publication October 27, 2011; date of current version November 23, 2011. This paper was approved by Guest Editor Miki Moyal.
Subject Keywords:Bi-directional transmission; CMOS; coherent transmission; 40 nm; injection lock; millimeter wave; plastic waveguide
Other Numbering System:
Other Numbering System NameOther Numbering System ID
INSPEC Accession Number12388399
Issue or Number:12
Record Number:CaltechAUTHORS:20120104-113526830
Persistent URL:https://resolver.caltech.edu/CaltechAUTHORS:20120104-113526830
Official Citation:Fukuda, S.; Hino, Y.; Ohashi, S.; Takeda, T.; Yamagishi, H.; Shinke, S.; Komori, K.; Uno, M.; Akiyama, Y.; Kawasaki, K.; Hajimiri, A.; , "A 12.5+12.5 Gb/s Full-Duplex Plastic Waveguide Interconnect," Solid-State Circuits, IEEE Journal of , vol.46, no.12, pp.3113-3125, Dec. 2011 doi: 10.1109/JSSC.2011.2168870
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:28649
Collection:CaltechAUTHORS
Deposited By: Jason Perez
Deposited On:04 Jan 2012 23:15
Last Modified:03 Oct 2019 03:34

Repository Staff Only: item control page