A Caltech Library Service

A micro silicon hot-wire anemometer

Mischler, Martin and Tseng, Fan-Gang and Ulmanella, Umberto and Ho, Chih-Ming and Jiang, Fukang and Tai, Yu-Chong (1995) A micro silicon hot-wire anemometer. In: 1995 IEEE TENCON: IEEE Region 10 International Conference on Microelectronics and VLSI. IEEE Hong Kong Section , Hong Kong, pp. 20-23. ISBN 0-7803-2624-5.

Full text is not posted in this repository. Consult Related URLs below.

Use this Persistent URL to link to this item:


A new micromachined hot-wire anemometer has been developed. Extensive tests of the anemometer's dependence on ambient temperature, over-heat ratio, and sensor length have been finalized. Due to its extremely small size, micromachined hot-wire has better sensitivity, temporal and spatial resolutions than the conventional hot-wire. Because of the large bandwidth (Mhz), velocity fluctuations at high Reynolds number flow can be measured.

Item Type:Book Section
Related URLs:
URLURL TypeDescription
Tai, Yu-Chong0000-0001-8529-106X
Additional Information:© 1995 IEEE. Issue Date: 6-10 Nov 1995; Date of Current Version: 06 August 2002. This work is supported by an AFOSR grant. We appreciate the help from Dr. Jin-Biao Huang.
Funding AgencyGrant Number
Air Force Office of Scientific Research (AFOSR)UNSPECIFIED
Other Numbering System:
Other Numbering System NameOther Numbering System ID
INSPEC Accession Number5262601
Record Number:CaltechAUTHORS:20120216-102529210
Persistent URL:
Official Citation:Mischler, M.; Fan-Gang Tseng; Ulmanella, U.; Chih-Ming Ho; Fukang Jiang; Yu-Chong Tai; , "A micro silicon hot-wire anemometer," Microelectronics and VLSI, 1995. TENCON '95., IEEE Region 10 International Conference on , vol., no., pp.20-23, 6-10 Nov 1995 doi: 10.1109/TENCON.1995.496325
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:29335
Deposited On:16 Feb 2012 19:16
Last Modified:09 Nov 2021 17:06

Repository Staff Only: item control page