CaltechAUTHORS
  A Caltech Library Service

Estimates of regional and local strong motions during the great 1923 Kanto, Japan, earthquake (Ms 8.2). Part 1: Source estimation of a calibration event and modeling of wave propagation paths

Sato, Toshiaki and Helmberger, Donald V. and Somerville, Paul G. and Graves, Robert W. and Saikia, Chandan K. (1998) Estimates of regional and local strong motions during the great 1923 Kanto, Japan, earthquake (Ms 8.2). Part 1: Source estimation of a calibration event and modeling of wave propagation paths. Bulletin of the Seismological Society of America, 88 (1). pp. 183-205. ISSN 0037-1106. https://resolver.caltech.edu/CaltechAUTHORS:20130109-111101743

[img]
Preview
PDF - Published Version
See Usage Policy.

2475Kb

Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20130109-111101743

Abstract

This article is the first of a pair of articles that estimate regional and local strong motions from the 1923 Kanto, Japan, earthquake. This Ms 8.2 earthquake caused the most devastating damage in the metropolitan area in Tokyo history. In this article, we first calibrate wave propagation path effects with a moderate-sized modern event. This event, the Odawara earthquake of 5 August 1990 (M 5.1), is the first earthquake larger than M 5 in the last 60 years near the hypocenter of the 1923 Kanto earthquake. We estimate the source parameters based on a grid-search technique using body-waveform data bandpass filtered from 1 to 10 sec at four local stations, because accurate source parameters are critical for calibrating the propagation effects. We find that the Odawara earthquake had a depth of 15.3 km, a dip of 35°, a rake of 40°, a strike of 215°, a seismic moment of 3.3 × 10^(23) dyne-cm, a source duration of 0.65 sec, and a stress drop of 170 bars. Next, we investigate the effects of the propagation paths to the local and regional stations where seismograms of the 1923 Kanto earthquake were recorded, by comparing recorded waveforms with synthetic seismograms built with the calibration event. Path-specific flat-layered velocity models are estimated along travel paths from the event to stations Hongo (epicentral distance R = 82 km) in Tokyo, Gifu (R = 213 km), and Sendai (R = 374 km) using forward modeling. In constructing the velocity model for the Gifu station, we use STS-1 broadband seismograms recorded at the nearby Inuyama station. Consequently, at periods greater than 3 sec, the velocity models for stations Hongo and Gifu can successfully reproduce both body waves and direct surface waves, and the velocity model for Sendai station can explain the predominant direct surface waves. In the companion article (Sato et al., 1998), these velocity models are used to examine the adequecy of the variable-slip rupture models of the 1923 Kanto earthquake (Wald and Somerville, 1995; Takeo and Kanamori, 1992) to explain recorded seismograms and also to simulate strong motions from that event.


Item Type:Article
Related URLs:
URLURL TypeDescription
http://www.bssaonline.org/content/88/1/183.short?related-urls=yes&legid=ssabull;88/1/183PublisherUNSPECIFIED
Additional Information:© 1998 Seismological Society of America. Manuscript received 25 April 1996. This study was done while one of the authors (T.S.) was a visiting associate at the Seismological Laboratory, California Institute of Technology on leave from Izumi Research Institute, Shimizu Corporation. We would like to express our gratitude to Mr. S. Kataoka (Shimizu Corporation) for informative interactions through the period of this project. We would like to thank Drs. K. Kudo (Earthquake Research Institute, the University of Tokyo), S. Zama (Fire Research Institute, Ministry of Home Affairs), and K. Seo and T. Samano (Tokyo Institute of Technology) for providing us with the strong-motion data. We would like to thank Drs. K. Yamaoka and K. Ishihara (Nagoya University) for providing us with the STS-1 broadband data. We are grateful to Drs. F. Kusano and H. Suzuki and other staff members of the Japan Meteorological Agency for providing us with copies of the original recordings of the strong-motion data. We would like to thank to Dr. S. Hori (National Research Institute for Earth Science and Disaster Prevention) for providing us with the information on the source mechanism. We are especially grateful to Dr. M. Takemura (Kajima Corporation) for providing us with his articles on the 1923 Kanto earthquake. We are also grateful to Drs. H. Kanamori (California Institute of Technology), M. Kikuchi (Yokohama City University), M. Ishida (National Research Institute for Earth Science and Disaster Prevention), D. Wald (U.S. Geological Survey), D. Zhao (Washington University), X. Song (California Institute of Technology), and A. Pitarka (Kyoto University) for valuable discussions. Finally, we thank Drs. Arthur F. McGarr and John E. Vidale and an anonymous reviewer for their comments that helped improve the manuscript.
Issue or Number:1
Record Number:CaltechAUTHORS:20130109-111101743
Persistent URL:https://resolver.caltech.edu/CaltechAUTHORS:20130109-111101743
Official Citation: Toshiaki Sato, Donald V. Helmberger, Paul G. Somerville, Robert W. Graves, and Chandan K. Saikia Estimates of regional and local strong motions during the great 1923 Kanto, Japan, earthquake (Ms 8.2). Part 1: Source estimation of a calibration event and modeling of wave propagation paths Bulletin of the Seismological Society of America February 1998 88:183-205
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:36273
Collection:CaltechAUTHORS
Deposited By: Ruth Sustaita
Deposited On:09 Jan 2013 19:27
Last Modified:03 Oct 2019 04:36

Repository Staff Only: item control page