A Caltech Library Service

Soil mechanics surface sampler

Scott, R. F. and Roberson, F. I. (1969) Soil mechanics surface sampler. Journal of Geophysical Research, 74 (25). pp. 6175-6214. ISSN 0148-0227. doi:10.1029/JB074i025p06175.

PDF - Published Version
See Usage Policy.


Use this Persistent URL to link to this item:


A lunar surface sampler essentially identical to that operated from Surveyor 3 was mounted on Surveyor 7 and performed flawlessly on the moon throughout a range of operating temperatures from +180°F to −167°F. The motor current was sampled during lunar bearing and trenching tests, and these data, together with preflight calibrations enabled us to calculate the forces involved in these tests. After minimal lunar surface testing, the surface sampler was employed to release the sensor head of the α-scattering instrument, which had jammed in its background position. Subsequently, the sensor head was relocated to analyze a rock and, still later, to analyze some subsurface lunar material. The mechanical tests of the surface in the vicinity of Tycho indicated that the surface behaved in a manner that was quantitatively similar to the behavior of the material close to Surveyor 3, but the surface near Tycho appeared qualitatively to be more deformable and less brittle. A rock was weighed and found to have a density between 2.4 and 3.1 g/cm^3 (earth basis). Another rock was broken by a moderately hard blow from the sampler. The soil varied in depth from 1 to at least several inches over underlying rock fragments near Surveyor 7. Little adhesion of lunar soil to the mirror surface of the α-scattering experiment sensor head was observed over a 24-hour period.

Item Type:Article
Related URLs:
URLURL TypeDescription
Additional Information:Copyright 1969 by the American Geophysical Union. (Received July 17, 1969.) The assistance and advice of M. C. Clary in the analysis of the performance of the mechanism and auxiliary, especially under critical temperature conditions during the mission, contributed materially to the success of the operation. The work described herein was performed by the senior author under contract JPL-CIT 69811 with the Jet Propulsion Laboratory. The surface sampler was designed and built by the Hughes Aircraft Company, El Segundo, California.
Funding AgencyGrant Number
JPL/CaltechJPL-CIT 69811
Issue or Number:25
Record Number:CaltechAUTHORS:20141107-110442777
Persistent URL:
Official Citation:Scott, R. F., and F. I. Roberson (1969), Soil mechanics surface sampler, J. Geophys. Res., 74(25), 6175–6214, doi:10.1029/JB074i025p06175.
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:51433
Deposited By: George Porter
Deposited On:07 Nov 2014 21:04
Last Modified:10 Nov 2021 19:10

Repository Staff Only: item control page