Vreeland, T., Jr. (1961) Tilt boundary motion in zinc produced by static and dynamic shear stress. Acta Metallurgica, 9 (2). pp. 112-116. ISSN 0001-6160. doi:10.1016/0001-6160(61)90054-2. https://resolver.caltech.edu/CaltechAUTHORS:20150126-125034660
Full text is not posted in this repository. Consult Related URLs below.
Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20150126-125034660
Abstract
Crystals grown from 99.999+ per cent zinc and zone refined zinc were subjected to static and dynamic shear loading. Tilt boundaries in crystals of zone refined zinc move at static stresses of approximately 3 lb/in^2, while stresses of approximately 30 lb/in^2 will not move boundaries in 99.999+ per cent purity zinc. The stress required to initiate boundary motion within a time interval of 17 × 10^(−6) sec in a dynamic test is about 100 times greater than the stress required in a static test. The boundary velocity increases linearly with increasing dynamic stress.
Item Type: | Article | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Related URLs: |
| |||||||||
Alternate Title: | Deplacement des joints de flexion dans le zinc pkovoque par une tension de cisaillement statique ou dynamique, Die bewegung von kleinwinkel-kokngkenzen in zink unter dem einfluβ von statischen und dynamischen schubspannungen | |||||||||
Additional Information: | © 1961 Published by Elsevier Ltd. Received February 8, 1960. This research was supported by the U.S. Air Force through the Air Force Office of Scientific Research of the Air Research and Development Command, under contract No. AF 18(600)-490. This research was supported by the Solid State Sciences Division, Air Force Office of Scientific Research. The author wishes to extend his thanks to this agency for support of the work reported herein. The author is indebted to Professors D . S. Clark and D. S. Wood, of the California Institute of Technology, for advice and discussions during the course of the work, and to Mr. Kenneth Adams who assisted in the preparation of specimens and in the performance of the tests. | |||||||||
Funders: |
| |||||||||
Issue or Number: | 2 | |||||||||
DOI: | 10.1016/0001-6160(61)90054-2 | |||||||||
Record Number: | CaltechAUTHORS:20150126-125034660 | |||||||||
Persistent URL: | https://resolver.caltech.edu/CaltechAUTHORS:20150126-125034660 | |||||||||
Official Citation: | T Vreeland Jr., Tilt boundary motion in zinc produced by static and dynamic shear stress, Acta Metallurgica, Volume 9, Issue 2, February 1961, Pages 112-116, ISSN 0001-6160, http://dx.doi.org/10.1016/0001-6160(61)90054-2. (http://www.sciencedirect.com/science/article/pii/0001616061900542) | |||||||||
Usage Policy: | No commercial reproduction, distribution, display or performance rights in this work are provided. | |||||||||
ID Code: | 54085 | |||||||||
Collection: | CaltechAUTHORS | |||||||||
Deposited By: | Tony Diaz | |||||||||
Deposited On: | 26 Jan 2015 21:42 | |||||||||
Last Modified: | 10 Nov 2021 20:29 |
Repository Staff Only: item control page