CaltechAUTHORS
  A Caltech Library Service

High performance p-type segmented leg of misfit-layered cobaltite and half-Heusler alloy

Hung, Le Thanh and Nong, Ngo Van and Snyder, G. Jeffrey and Viet, Man Hoang and Balke, Benjamin and Han, Li and Stamate, Eugen and Linderoth, Søren and Pryds, Nini (2015) High performance p-type segmented leg of misfit-layered cobaltite and half-Heusler alloy. Energy Conversion and Management, 99 . pp. 20-27. ISSN 0196-8904. https://resolver.caltech.edu/CaltechAUTHORS:20150707-113641152

Full text is not posted in this repository. Consult Related URLs below.

Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20150707-113641152

Abstract

In this study, a segmented p-type leg of doped misfit-layered cobaltite Ca_(2.8)Lu_(0.15)Ag_(0.05)Co_4O_(9+δ) and half-Heusler Ti_(0.3)Zr_(0.35)Hf_(0.35)CoSb_(0.8)Sn_(0.2) alloy was fabricated and characterized. The thermoelectric properties of single components, segmented leg, and the electrical contact resistance of the joint part were measured as a function of temperature. The output power generation characteristics of segmented legs were characterized in air under various temperature gradients, ΔT, with the hot side temperature up to 1153 K. At ΔT ≈ 756 K, the maximum conversion efficiency reached a value of ∼5%, which is about 65% of that expected from the materials without parasitic losses. The long-term stability investigation for two weeks at the hot and cold side temperatures of 1153/397 K shows that the segmented leg has good durability as a result of stable and low electrical resistance contacts.


Item Type:Article
Related URLs:
URLURL TypeDescription
http://dx.doi.org/10.1016/j.enconman.2015.03.112DOIArticle
http://www.sciencedirect.com/science/article/pii/S0196890415003386PublisherArticle
ORCID:
AuthorORCID
Snyder, G. Jeffrey0000-0003-1414-8682
Additional Information:© 2015 Elsevier Ltd. Received 28 July 2014; Accepted 30 March 2015; Available online 21 April 2015. BB gratefully acknowledges the financial support by the DFG Priority Program 1386 ‘‘Nanostructured Thermoelectric Materials’’ under proposal BA 4171/2-2. NVN acknowledges the support by the NAFOSTED grant under proposal 103.02 2011.10. The authors would like to thank the Programme Commission on Sustainable Energy and Environment, The Danish Council for Strategic Research for sponsoring the ‘‘Oxide thermoelectrics for effective power generation from waste heat’’ (OTE-POWER) (No. 10-093971) as well as the ‘‘CTEC - Center for Thermoelectric Energy Conversion’’ (No. 1305-00002B) projects. The authors also thank the European Commission for sponsoring the NanoCaTe (FP7-NMP No. 604647) project.
Funders:
Funding AgencyGrant Number
Deutsche Forschungsgemeinschaft (DFG)BA 4171/2-2
National Foundation for Science and Technology (NAFOSTED)103.02-2011.10
Programme Commisssion on Energy and Environment (EnMi)UNSPECIFIED
Danish Council for Strategic Research10-093971
Center for Thermoelectric Energy Conversion (CTEC)1305-00002B
European Commission604647
Subject Keywords:Segmented thermoelectrics; Segmented oxide-metal alloy; Thermoelectric efficiency; Power generation efficiency
Record Number:CaltechAUTHORS:20150707-113641152
Persistent URL:https://resolver.caltech.edu/CaltechAUTHORS:20150707-113641152
Official Citation:Hung, L. T., Van Nong, N., Snyder, G. J., Viet, M. H., Balke, B., Han, L., . . . Pryds, N. (2015). High performance p-type segmented leg of misfit-layered cobaltite and half-Heusler alloy. Energy Conversion and Management, 99(0), 20-27. doi: http://dx.doi.org/10.1016/j.enconman.2015.03.112
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:58790
Collection:CaltechAUTHORS
Deposited By: Joanne McCole
Deposited On:07 Jul 2015 21:50
Last Modified:03 Oct 2019 08:39

Repository Staff Only: item control page