Keehr, Edward and Hajimiri, Ali (2008) Equalization of IM3 Products in Wideband Direct-Conversion Receivers. In: 2008 IEEE International Solid-State Circuits Conference - Digest of Technical Papers. IEEE , Piscataway, NJ, pp. 204-607. ISBN 978-1-4244-2010-0. https://resolver.caltech.edu/CaltechAUTHORS:20170404-173623505
![[img]](https://authors.library.caltech.edu/style/images/fileicons/application_pdf.png) |
PDF
- Published Version
See Usage Policy. 752kB |
|
PDF (Slides)
- Presentation
See Usage Policy. 1MB |
Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20170404-173623505
Abstract
The wideband direct-conversion receiver architecture is proposed in this paper. In order to provide a quantitative design objective, the UMTS standard is targeted. The single-ended-to-differential conversion previously handled by an inter-stage SAW filter is now performed by a balun. The balun is followed by high-P2 MP mixers driven by Cherry-Hooper LO buffers. The MP BB filter is an active-RC 3 rd-order Chebyshev architecture that drives an 8b pipelined ADC with fs=50 MHz. The AP is a scaled-down version of the MP, with the primary difference being the inclusion of an IM3 generator. As scaling reduces the breakdown voltage of CMOS devices and as system integration trends demand the further elimination of off- chip components, there arises a great need to improve the linearity of RF receivers.
| Item Type: | Book Section | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Related URLs: |
| |||||||||
| ORCID: |
| |||||||||
| Additional Information: | © 2008 IEEE. The authors thank F. Bohn for the frequency divider IP and H. Mani and J. Yoo for testing assistance. This work was supported by an NDSEG Fellowship and the Lee Center for Advanced Networking. | |||||||||
| Funders: |
| |||||||||
| DOI: | 10.1109/ISSCC.2008.4523128 | |||||||||
| Record Number: | CaltechAUTHORS:20170404-173623505 | |||||||||
| Persistent URL: | https://resolver.caltech.edu/CaltechAUTHORS:20170404-173623505 | |||||||||
| Official Citation: | E. Keehr and A. Hajimiri, "Equalization of IM3 Products in Wideband Direct-Conversion Receivers," 2008 IEEE International Solid-State Circuits Conference - Digest of Technical Papers, San Francisco, CA, 2008, pp. 204-607. doi: 10.1109/ISSCC.2008.4523128 | |||||||||
| Usage Policy: | No commercial reproduction, distribution, display or performance rights in this work are provided. | |||||||||
| ID Code: | 75708 | |||||||||
| Collection: | CaltechAUTHORS | |||||||||
| Deposited By: | INVALID USER | |||||||||
| Deposited On: | 05 Apr 2017 04:30 | |||||||||
| Last Modified: | 15 Nov 2021 16:35 |
Repository Staff Only: item control page
