CaltechAUTHORS
  A Caltech Library Service

A multiscale approach for modeling crystalline solids

Cuitiño, Alberto M. and Stainier, Laurent and Wang, Guofeng and Strachan, Alejandro and Çağin, Tahir and Goddard, William A., III and Ortiz, Michael (2001) A multiscale approach for modeling crystalline solids. Journal of Computer-Aided Materials Design, 8 (2/3). pp. 127-149. ISSN 0928-1045. https://resolver.caltech.edu/CaltechAUTHORS:20171212-152625957

[img] PDF - Submitted Version
See Usage Policy.

570Kb

Use this Persistent URL to link to this item: https://resolver.caltech.edu/CaltechAUTHORS:20171212-152625957

Abstract

In this paper we present a modeling approach to bridge the atomistic with macroscopic scales in crystalline materials. The methodology combines identification and modeling of the controlling unit processes at microscopic level with the direct atomistic determination of fundamental material properties. These properties are computed using a many body Force Field derived from ab initio quantum-mechanical calculations. This approach is exercised to describe the mechanical response of high-purity Tantalum single crystals, including the effect of temperature and strain-rate on the hardening rate. The resulting atomistically informed model is found to capture salient features of the behavior of these crystals such as: the dependence of the initial yield point on temperature and strain rate; the presence of a marked stage I of easy glide, specially at low temperatures and high strain rates; the sharp onset of stage II hardening and its tendency to shift towards lower strains, and eventually disappear, as the temperature increases or the strain rate decreases; the parabolic stage II hardening at low strain rates or high temperatures; the stage II softening at high strain rates or low temperatures; the trend towards saturation at high strains; the temperature and strain-rate dependence of the saturation stress; and the orientation dependence of the hardening rate.


Item Type:Article
Related URLs:
URLURL TypeDescription
https://doi.org/10.1023/A:1020012431230DOIArticle
https://link.springer.com/article/10.1023/A:1020012431230PublisherArticle
https://arxiv.org/abs/cond-mat/0104381arXivDiscussion Paper
ORCID:
AuthorORCID
Çağin, Tahir0000-0002-3665-0932
Goddard, William A., III0000-0003-0097-5716
Additional Information:© Kluwer Academic Publishers 2001. Received 1 March 2001; Accepted 3 September 2001. The support of the DOE through Caltech’s ASCI Center for the Simulation of the Dynamic Response of Materials is gratefully acknowledged. LS also wishes to acknowledge support from the Belgian National Fund for Scientific Research (FNRS). This revised version was published online in June 2006 with corrections to the Cover Date.
Group:GALCIT
Funders:
Funding AgencyGrant Number
Department of Energy (DOE)UNSPECIFIED
Fonds National de la Recherche Scientifique (FNRS)UNSPECIFIED
Subject Keywords:Crystalline; Modeling; Multiscale approach
Issue or Number:2/3
Record Number:CaltechAUTHORS:20171212-152625957
Persistent URL:https://resolver.caltech.edu/CaltechAUTHORS:20171212-152625957
Official Citation:Cuitiño, A.M., Stainier, L., Wang, G. et al. Journal of Computer-Aided Materials Design (2001) 8: 127. https://doi.org/10.1023/A:1020012431230
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:83845
Collection:CaltechAUTHORS
Deposited By: Lydia Suarez
Deposited On:19 Dec 2017 22:34
Last Modified:03 Oct 2019 19:11

Repository Staff Only: item control page