A Caltech Library Service

A Programmable Cryogenic Waveguide Calibration Load With Exceptional Temporal Response and Linearity

Kooi, Jacob W. and Reeves, Rodrigo A. and Lichtenberger, Arthur W. and Reck, Theodore J. and Fung, Andy K. and Weinreb, Sander and Lamb, James W. and Gawande, Rohit S. and Cleary, Kieran A. and Chattopadhyay, Goutam (2018) A Programmable Cryogenic Waveguide Calibration Load With Exceptional Temporal Response and Linearity. IEEE Transactions on Terahertz Science and Technology, 8 (4). pp. 434-445. ISSN 2156-342X.

Full text is not posted in this repository. Consult Related URLs below.

Use this Persistent URL to link to this item:


We have developed a programmable, fast switching, accurate, and miniaturized calibration load for use in millimeter and submillimeter low-noise amplifier characterization, and Earth/planetary science radiometers. The proposed solution uses a thermally conductive waveguide vane attenuator with low thermal mass, integrated heater, and silicon thermometer. In the present design, we utilize a 125-μm-thick z-cut crystal quartz vane due to its low dielectric constant (relative to silicon), high cryogenic thermal conductivity, chemical robustness, and small thermal contraction. To provide adequate attenuation, the bottom side of the quartz fabrication wafer has an nm thick resistive Ti metal layer deposited. On the top of the quartz wafer, a pattern of Au is deposited to allow adhesion of the heater resistor, thermometer, and internal heat strap. The z-cut quartz vane is mounted on three low thermally conductive Torlon posts, centered on the maximum E-field, and positioned across the waveguide. With this approach the quartz vane, protruding all the way into the waveguide, approximates a blackbody with a physical temperature T. The design uniqueness lies in the choice of cryogenically suitable materials coupled with detailed thermal analyses and proper miniaturization. When operated in a proportional−integral−derivative loop, these properties combine to facilitate a programmable calibration load with a switching speed of ≲10 s. It will be shown that the W-band design operates overmoded to ∼230 GHz and that the concept is in principle scalable to terahertz frequencies.

Item Type:Article
Related URLs:
URLURL TypeDescription
Kooi, Jacob W.0000-0002-6610-0384
Reeves, Rodrigo A.0000-0001-5704-271X
Reck, Theodore J.0000-0003-1425-0177
Fung, Andy K.0000-0003-4849-759X
Chattopadhyay, Goutam0000-0001-7942-5025
Additional Information:© 2018 IEEE. Manuscript received December 3, 2017; accepted April 4, 2018. Date of publication May 17, 2018; date of current version July 2, 2018. This work was supported in part by the Gordon and Betty Moore Foundation, in part by the Kenneth and Eileen Norris Foundation, in part by the Associates of the California Institute of Technology, in part by the NSF under Grant AST-9977420, Grant AST-0116558, and Grant AST-1040504 in the development of the cryogenic calibration loads at the California Institue of Technology’s Cahill Radio Astronomy Laboratory, and in part by the National Aeronautical and Space Administration at the Jet Propulsion Laboratory, California Institute of Technology, under a contract, which allowed further characterization of the calibration loads.
Funding AgencyGrant Number
Gordon and Betty Moore FoundationUNSPECIFIED
Kenneth and Eileen Norris FoundationUNSPECIFIED
Caltech AssociatesUNSPECIFIED
Subject Keywords:Blackbody, cryogenics, Dicke switched radiometer, fast switching, forced response, linearity, low-noise amplifier (LNA), material properties, natural decay, programmable, steady-state, thermodynamics, vane attenuator, z-cut crystal quartz
Issue or Number:4
Record Number:CaltechAUTHORS:20180524-102654997
Persistent URL:
Official Citation:J. W. Kooi et al., "A Programmable Cryogenic Waveguide Calibration Load With Exceptional Temporal Response and Linearity," in IEEE Transactions on Terahertz Science and Technology, vol. 8, no. 4, pp. 434-445, July 2018. doi: 10.1109/TTHZ.2018.2826838
Usage Policy:No commercial reproduction, distribution, display or performance rights in this work are provided.
ID Code:86588
Deposited By: Tony Diaz
Deposited On:24 May 2018 18:24
Last Modified:09 Mar 2020 13:19

Repository Staff Only: item control page