Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published September 7, 2006 | Published
Book Section - Chapter Open

Tunable optofluidic distributed feedback dye lasers


We demonstrated a continuously tunable optofluidic distributed feedback (DFB) dye laser on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip. The optical feedback was provided by a phase-shifted higher order Bragg grating embedded in the liquid core of a single mode buried channel waveguide. We achieved nearly 60nm continuously tunable output by mechanically varying the grating period with two dye molecules Rhodamine 6G (Rh6G) and Rhodamine 101 (Rh101). Single-mode operation was obtained with <0.1nm linewidth. Because of the higher order grating, a single laser, when operated with different dye solutions, can provide tunable output covering from near UV to near IR spectral region. The low pump threshold (< 1uJ) makes it possible to use a single high energy pulsed laser to pump hundreds of such lasers on a chip. An integrated array of five DFB dye lasers with different lasing wavelengths was also demonstrated. Such laser arrays make it possible to build highly parallel optical sensors on a chip. The laser chip is fully compatible with PDMS based soft microfluidics.

Additional Information

© 2006 Society of Photo-Optical Instrumentation Engineers (SPIE). This research was supported by the DARPA center for optofluidic integration at California Institute of Technology.

Attached Files

Published - 632903.pdf


Files (487.6 kB)
Name Size Download all
487.6 kB Preview Download

Additional details

August 19, 2023
January 14, 2024