Published September 28, 2012 | Version Published
Journal Article Open

Constraints from rocks in the Taiwan orogen on crustal stress levels and rheology

  • 1. ROR icon California Institute of Technology
  • 2. ROR icon University of Otago
  • 3. ROR icon Institute of Earth Sciences, Academia Sinica

Abstract

Taiwan's Hsüehshan range experienced penetrative coaxial deformation within and near the brittle-plastic transition between ∼6.5 and 3 Ma. This recent and short-lasting deformation in an active, well-studied orogen makes it an ideal natural laboratory for studying crustal rheology. Recrystallized grain size piezometry in quartz and Ti-in-quartz thermobarometry yield peak differential stresses of ∼200 MPa at 250–300°C that taper off to ∼80 MPa at ∼350°C and ∼14 MPa at ∼400–500°C. Stress results do not vary with lithology: recrystallized quartz veins in slates and metasiltstones yield equivalent stresses as recrystallized grains in quartzites. A minimum strain rate of 2.9 × 10^(−15) s^(−1) associated with this deformation is calculated by dividing a strain measurement (axial strain ∼0.3) in a strongly deformed quartzite by the available 3.5 m.y. deformation interval. We estimate a maximum strain rate of 7.0 × 10^(−14) s^(−1) by distributing the geodetic convergence rate throughout a region homogeneously deformed under horizontal compression. These stress, strain rate and temperature estimates are consistent with the predictions of widely applied dislocation creep flow laws for quartzite. The samples record stress levels at the brittle-plastic transition, indicating a coefficient of friction (μ) of 0.37 in the upper crust consistent with results based on critical taper. Integrated crustal strength of the Hsüehshan range amounts to 1.7 × 10^(12) N/m based on our analysis, consistent with potential energy constraints based on topography. Other strength profiles are considered, however high crustal stresses (>300 MPa) conflict with our analysis. The study supports the use of the recrystallized grain size piezometer in quartz as a quick and inexpensive method for resolving stress histories in greenschist facies rocks. For consistency with the independent constraints presented here, we find it accurate to within +20%/−40%, significantly better than previously recognized.

Additional Information

© 2012 American Geophysical Union. Received 8 March 2012; revised 8 July 2012; accepted 10 August 2012; published 28 September 2012. We thank Whitney Behr, Timothy Byrne, Greg Hirth, John Suppe, Jian-Cheng Lee, and John Platt for input that helped clarify the ideas presented in this manuscript. Assistance in the field was provided by Chih-Tung Chen, Chung Huang, Aaron Martin, Yen-Chi Tseng, Shiao An-You, and Yong Chi-Kai. Reviewers Georg Dresen and Jan Tullis provided helpful feedback that improved the manuscript substantially. The Gordon and Betty Moore Foundation provided financial support. This is Caltech Tectonics Observatory contribution 200.

Attached Files

Published - 2012JB009303.pdf

Files

2012JB009303.pdf

Files (861.1 kB)

Name Size Download all
md5:4262f36c089c9a5a61d2ca4fe06f3810
861.1 kB Preview Download

Additional details

Identifiers

Eprint ID
35352
Resolver ID
CaltechAUTHORS:20121108-095123650

Funding

Gordon and Betty Moore Foundation

Dates

Created
2012-11-08
Created from EPrint's datestamp field
Updated
2021-11-09
Created from EPrint's last_modified field

Caltech Custom Metadata

Caltech groups
Caltech Tectonics Observatory, Seismological Laboratory, Division of Geological and Planetary Sciences (GPS)
Other Numbering System Name
Caltech Tectonics Observatory
Other Numbering System Identifier
200