Welcome to the new version of CaltechAUTHORS. Login is currently restricted to library staff. If you notice any issues, please email coda@library.caltech.edu
Published 1969 | public
Journal Article

Combustion instability of solid propellants

Abstract

Experimental data has been obtained from two T-burners and an L^* burner over a range of frequencies from 10 cps to 8000 cps and from 25 psia to 1000 psia. From these data the response of the propellants to a pressure perturbation has been calculated and has been found to be consistent between burners. The results have been interpreted as a response function surface with burning rate and frequencies as independent variables. The data indicates that for a given pressure level the response function has a peak value at a frequency that increases as pressure increases. The magnitude of this peak height varies with pressure so that there is a localized peak in the response function surface for a given propellant. The results are in qualitative agreement with theoretical studies in that the models also predict a maximum value in the response function. However, they also predict that this magnitude should be approximately a constant and not dependent on the pressure and frequency to the extent observed in the present study. The results obtained for an aluminized propellant indicate that presence of metal in the combustion zone greatly influences both the magnitude of the response function peak as well as its location.

Additional Information

© 1969 Published by Elsevier B.V. Available online 27 April 2007. This work was performed under National Aeronautics and Space Administration Work Order No. 6030 and Naval Ordnance Systems Command Task No. ORD-088 108/200 I/F009-06-01 PA No.8.

Additional details

Created:
August 19, 2023
Modified:
October 21, 2023