Effects of Near-Fault Sedimentary Rocks and Damage on the 2019 Ridgecrest, CA Earthquake: A Rupture Impediment or a Ground Motion Booster?
Abstract
Observations of the 2019 magnitude 7.1 Ridgecrest, California, earthquake indicate a relatively slow rupture (2 km/s). The fault is surrounded by sedimentary rocks and low‐velocity damage zones, which can amplify ground motions but also slow down rupture. Here, we develop 3D dynamic rupture models to elucidate the significance of such effects on the Ridgecrest earthquake. We find that: (a) sedimentary rocks and damage, being shallow, do not explain the slow rupture but amplify slip and ground motion by more than a factor of 3; (b) accounting for ground motion amplification by sedimentary rocks improves the agreement with empirical predictions; (c) damage zone contributions to surface slip are minor (5%) for this event but could reach 25% in future southern California earthquakes. Our study corroborates the significance of source and site effects due to heterogeneous near‐fault materials during the Ridgecrest earthquake, and provides insights for future rupture and source‐to‐site hazard modeling efforts.
Copyright and License
© 2025 The Author(s).
This is an open access article under the terms of the Creative Commons Attribution-NonCommercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.
Acknowledgement
We thank Luis A. Dalguer for his constructive comments that have guided this study. The computations presented here were conducted in the Resnick High Performance Computing Center, a facility supported by Resnick Sustainability Institute at the California Institute of Technology. EO was supported by Statewide California Earthquake Center (SCEC) award 22108. JPA was supported by the French government through the UCAJEDI Investments in the Future project (ANR-15-IDEX-01) managed by the National Research Agency (ANR).
Data Availability
The code to reproduce the 3D dynamic rupture simulations, SPECFEM3D, is available online (Komatitsch et al., 2024). The data sets to reproduce the simulations are provided in Oral (2024). The code of initial stress state calculation has minor modifications over Oral, Ampuero, et al. (2022), including constraining stochastic past seismicity to the vicinity of recent earthquakes, and using radial hypocentral distance instead of horizontal distance when calculating distance-dependent characteristic slip distance.
Supplemental Material
Files
Name | Size | Download all |
---|---|---|
md5:262fc50cd9d71b51aa7955220acdd90c
|
2.8 MB | Preview Download |
md5:65082adeca3ae454a39b5b8142c3e2cc
|
3.2 MB | Preview Download |
Additional details
- Southern California Earthquake Center
- 22108
- Agence Nationale de la Recherche
- ANR‐15‐IDEX‐01
- Accepted
-
2025-03-06
- Available
-
2025-04-09Version of Record online
- Caltech groups
- Division of Engineering and Applied Science (EAS)
- Publication Status
- Published